전문 고주파 회로 기 판,고속 회로 기 판,IC 패 키 징 기 판,반도체 테스트 판,HDI 회로 기 판,소프트 하 드 결합 판,양면 다 층 판,PCB 디자인 및 PCBA 제조
믿 을 만 한 PCB 회로 제조 업 체!! Contact Us
0
IC Substrate

IC Substrate

IC Substrate

IC Substrate

  • 2layers Halogen Free(HF) Antenna PCB
    2layers Halogen Free(HF) Antenna PCB

    Material :2layers Halogen Free(HF) Antenna PCB

    Material : FR-4

    D K : 4.2

    Layer:2Layers

    Finished Thickness :0.8mm

    Material Copper Thickness :0.5OZ

    Finished Copper Thickness :1OZ(35μm)

    SurfaceTreatment :Immersion Gold

    Color : Green /White

    Min Trace / Space:12mil/12mil

    Special requirements : stable dielectric constant of material and strict line tolerance are required

    Product details Technical specification

    This is 2layers halogen free(HF) antenna PCB, antenna pcb has strict requirements on the line tolerance of radio frequency pcb(RF PCB) line. ipcb has sufficient experience to control the strict requirements of radio frequency(RF) antenna PCB.


    PCB antenna refers to the part of PCB used for wireless receiving and transmitting. Most of PCB antenna is omnidirectional wireless transmitting and receiving antenna, but different from conventional antenna, it is on PCB plane.

    Antenna PCB

    Antenna PCB

    Antenna PCB wireless equipment receiving and transmitting signals has been widely used in telecommunications. With the advent of 5g network, more and more electronic devices need antenna PCB communication, which is called the Internet of things (IOT).



    Antenna PCB design and RF layout are the two most important components of any wireless device. You can use two identical RF products, each with a different PCB antenna design and layout, and get two distinct RF performance ranges. What's the difference between them? It all depends on the quality and considerations in the design process.

    For many electronic applications in the 2.4 GHz and 915 MHz bands for commercial and consumer use, the demand for compact PCB antenna operation is increasing in ISM frequency band. As the name implies, the PCB antenna is printed directly on the PCB.

    Cost optimized planar F-antenna PCB

    Cost optimized planar F-antenna PCB

    Use the following formula to calculate the width of the antenna

    calculate the width of the antenna

    Design of F-type antenna

    The length of the meandering inverted-F antenna or mifa needs to be adjusted to consider the radiation impedance and frequency of the antenna. The tip and length of the mifa antenna are determined by the thickness of the PCB as follows:

    Design of F-type antenna

    Antenna PCB material should have high frequency, generally FR4 does not have good performance. Here we list the materials that can be used in antenna PCB manufacturing:

    Rogers PCB,Teflon PCB,Arlon PCB,Taconic PCB,Nelco PCB,Fr5 PCB,Dupont PCB,Isola PCB


    For pcb technical problems, ipcb knowledgeable support team is here to help you with every step. You can also request pcb quotation here. Please contact E-mail sales@ipcb.com

    We will respond very quickly.

    Material :2layers Halogen Free(HF) Antenna PCB

    Material : FR-4

    D K : 4.2

    Layer:2Layers

    Finished Thickness :0.8mm

    Material Copper Thickness :0.5OZ

    Finished Copper Thickness :1OZ(35μm)

    SurfaceTreatment :Immersion Gold

    Color : Green /White

    Min Trace / Space:12mil/12mil

    Special requirements : stable dielectric constant of material and strict line tolerance are required


    For pcb technical problems, ipcb knowledgeable support team is here to help you with every step. You can also request pcb quotation here. Please contact E-mail sales@ipcb.com

    We will respond very quickly.